![]() I contacted SCW again yesterday and they are air shipping 10 new cameras for delivery today. Needless to say I was not pleased after spending that amount of money on a security camera system especially since the robberies in the area are still happening daily. I contacted SCW after the first 2 failed and they asked me to test all 10 and sure enough all 10 were bad. Every one of them produced a picture that is very blurry and not usable. The warriors on the other hand have a moisture issue on the inside of the lens. the Gladiator is great and did exactly what I wanted. I bought a 10 camera 4K system with 10 warrior 8 cameras and I added 1 gladiator to see the barn that is a little ways away. every person I talked to has been very patient and has helped a lot. Connect a 12 VDC power supply (not included) to the camera power connector.Service is excellent and product issues were handle correctlyįirst of all I want to say the service itself has been excellent. Connect a network cable to the camera Ethernet connector. For compatible power supplies, refer to “Accessories”.Ĭonnect a network cable to the camera Ethernet connector. Connect the cable to a PoE switch or injector. Refer to Figure 4 when mounting the camera. Use the included screws and wall anchors to mount the camera base to a wall or ceiling. The mounting surface must be capable of holding five times the camera’s weight. Refer to Figure 5 when adjusting the camera.ġ. Loosen the adjustment screw with the included L‑key.Ģ. Adjust the pan, tilt, and camera rotation angle as needed.ģ. To lock the camera in place, tighten the adjustment screw with the L‑key.Īfter you’ve connected the camera to the network, activate it in Dealer Admin. Find the customer and select the relevant account number.In Video, enable SecureCom Cameras & NVR, then press Save.On the System Information page, press the Add Camera button and enter the camera’s 12‑digit MAC Address.If the camera image needs to be inverted due to mounting position, toggle Flip Image. ![]() ![]()
0 Comments
Leave a Reply. |